Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Speed Undercoat

Size
This product is currently unavailable online. Please visit your nearest store.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 13 m2/L.
  • Coats 1
Product Features
  • Improve adhesion between primer and sealer

Product Description

Dulux Speed Undercoat is an acrylic copolymer based undercoat. Its revolutionized formulation enables it to be used as an undercoat as well as a stain sealer.

Application Description

For normal use thinning is usually not necessary, but if required add up to 1 part of Dulux Thinner 850-41 or white spirit to 10 parts of paint (10%).

Health & Safety

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Steel surfaces should be manually prepared by power or hand tool to BS 7079 Part A1:1989 St3 and primed with anti corrosion primer. For masonry stained with joss stick incense, clean with a damp cloth preferably with detergent to remove soluble stains.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner 850-41 or white spirit immediately after use.
  • 3. Storing
    Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.