No Colour SelectedSelect a colour
Dulux Weathershield Acrylic Exterior Wall Finish
Ultimate Protection, Whatever the Weather
Finish Low Sheen
Coverage ≈ 12-13 m²/L
Drying Time Single coat at standard thickness Touch Dry: Dependant on temperature and humidity. Recoat: 2-3 hours.
Weathershield Acrylic Exterior Wall Finish is a premium quality, 100% acrylic based emulsion paint.
Anti-Fungus & algae
Low dirt pick-up technology
Low VOC, low odour
5 years Warranty
Health and safety
A910 LINE Dulux Weathershield Acrylic Exterior Wall Finish.pdf
Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Pure.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.
Clean all equipment with clean water immediately after use.
Keep away from food, drinks and animal feed. Store in a cool and shaded place.