Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.
No Colour Selected

Dulux Aura High Gloss
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish High Gloss
-
Coverage 18m²/L
-
Drying Time Single coat at standard thickness:
Touch Dry : 2-4 hours.
Recoat : 6-8 hours. -
Coats 2
-
Great gloss retention & firm clarity
-
Excellent colour fastness
-
Excellent durability & fungus resistance
-
Good brush loading and good sag resistance
-
No added Lead and Mercury
-
Certified with Malaysian Standards MS125:1995
Product Description
Dulux Aura High Gloss is a premium solvent based high gloss finish that gives a smooth mirror like finish
Application Description
Brush or Roller-Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with white spirit.
Conventional Spray-Dilute with 10%-20% of white spirit.
Airless Spray-Ready for use.
Conventional Spray-Dilute with 10%-20% of white spirit.
Airless Spray-Ready for use.
Health & Safety
Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking.
Avoid contact with skin.Contains: ETHYL METHYL KETOXIME, COBALT CARBOXYLATE.
May produce an allergic reaction.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To remove splashes of paint from skin, use soap and water or a recognized cleanser.
If swallowed seek medical advice immediately and show this container or label.
Keep away from food, drinks, animal feed and out of reach of children.
Keep away from combustible material.
Container must be stored in a cool and shaded place.
It must be tightly closed in a secure, upright position.
Work in a well-ventilated area and do not breathe in vapor or spray.
A suitable mask should be worn during sanding.
When applying paint, it is advisable to wear eye protection.
In case of firm use foam, dry powder, AFFF, CO2 – never use water.
In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment.
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Dulux Product Safety Data Sheet for further details.
- R2100128Line_Aura_High_Gloss_17Apr2020.pdf
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.
Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot- primed.
For optimum performance, new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion. -
2. CleaningClean all equipment with white spirit immediately after use.
-
3. StoringKeep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.