No Colour Selected

Dulux Weathershield Roof

Select a Colour
Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid-Sheen
  • Coverage 20m²/5L
  • Drying Time Single coat at standard thickness
    Touch Dry: 1 hour.
    Recoat: 2-3 hours.
  • Coats 2
Product Features
  • KeepCool™
  • Excellent colour fastness properties
  • Excellent alkali resistence
  • Effective mould control

Product Description

Dulux Weathershield Roof is a high quality, highly durable 100% acrylic based emulsion with a smooth finish and mid sheen.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
Download Adobe Reader
  • A968 LINE Dulux Weathershield Roof.pdf
  • ds_my_en_dulux_weathershield_roof_my.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces to be painted must be thoroughly cleaned to ensure good adhesion. Remove all loose or defective paint or powdery residues by thorough brushing or scraping, using a stiff fiber brush with running water or high pressure water jet. Treat any areas affected by mould, lichens, algae, and moss with Dulux Fungicidal Wash. Repair minor cracks before painting. Use a sand and cement mix for larger holes and cracks. Allow to dry before priming with Dulux Weathershield Roof Primer. Note: Paint will not adhere on dirty and powdery substrates which are not thoroughly cleaned. Do not apply Dulux Weathershield Roof during wet weather.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

Sorry, we couldn't find any results
Fetching the data, plz wait..