DULUX WOODCARE SATINWOOD

Interior wood paints

Size

1L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish NA
Coverage 12 m²/L
Drying Time Drying time : 6-8 hours under normal conditions
Recoat 2 : Min 8 hours under normal conditions
Coats 2

Product Features

Long-lasting protection
Great resistance to scratches and stains
Opaque colours available through tinting

Product Description

Dulux Woodcare Satinwood® gives all types of wood and metal surfaces a soft and smooth finish like egg-shells. It has a premium quality solvent based satin finish and provides good resistance to scratch and stain. It is quick drying and provides long lasting protection
with beautiful opaque colours.

Application Description

Ready for use after thorough stirring. Dilution up to 10% white spirit if required
SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
CLEAN SURFACE: Prime ferrous surfaces with Dulux Aura Metal Primer. For wood surfaces, apply one coat of Dulux Aura Speed Undercoat. Galvanised iron and aluminium surfaces to be
primed with Dulux Galvprime to ensure good adhesion.
NOTE: Always keep doors and windows fully open during application and drying.

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not eat, drink or smoke when using this product. Remove as much paints as possible from brushes and rollers before cleaning. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional user on request. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water jet. If medical advice is needed, have product container or label at hand

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
CLEAN SURFACE: Prime ferrous surfaces with Dulux Aura Metal Primer. For wood surfaces, apply one coat of Dulux Aura Speed Undercoat. Galvanised iron and aluminium surfaces to be
primed with Dulux Galvprime to ensure good adhesion.
NOTE: Always keep doors and windows fully open during application and drying.
2. Cleaning

Clean all equipment with white spirit immediately after use. In the event of an accident, contain and collect spillage using sand or earth.
3. Storing

Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.