Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.
DULUX WOODCARE TIMBERCOLOUR
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish NA
-
Coverage 12 m²/L
-
Drying Time Drying time : 2-3 hours under normal conditions
Recoat 2 : 2-3 hours under normal conditions -
Coats 2
-
Long-lasting colours with weather protection
-
Protection against cracking, flaking & peeling with algal and fungal resistance
-
Opaque colours available through tinting
Product Description
Dulux Woodcare Timbercolour gives exterior surfaces such as timber, galvanized iron
gutters and downpipes a low sheen finish with long lasting colours.
This water-based acrylic paint offers good algae and fungus resistance. Dulux Woodcare
Timbercolour also protects surfaces against cracking, flaking and peeling.
gutters and downpipes a low sheen finish with long lasting colours.
This water-based acrylic paint offers good algae and fungus resistance. Dulux Woodcare
Timbercolour also protects surfaces against cracking, flaking and peeling.
Application Description
SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free
from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
CLEAN SURFACE: Use Dulux Fungicidal Wash to treat areas affected by mould, algae, lichen or moss. For wood surfaces, no primer or undercoat is required. For Galvanised iron to be primed with Dulux Galvprime to ensure good adhesion.
NOTE: Always keep doors and windows fully open during application and drying.
from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
CLEAN SURFACE: Use Dulux Fungicidal Wash to treat areas affected by mould, algae, lichen or moss. For wood surfaces, no primer or undercoat is required. For Galvanised iron to be primed with Dulux Galvprime to ensure good adhesion.
NOTE: Always keep doors and windows fully open during application and drying.
Health & Safety
Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes.
Wet sanding/ flatting should be used wherever possible.
Work in well ventilated areas.
Use suitable personal protection equipment.
Wear eye/hand protection.
Do not breathe vapour/ spray.
Do not eat, drink or smoke when using this product.
Use only in well-ventilated areas.
Remove as much paints as possible from brushes and rollers before cleaning.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
IF ON SKIN (or hair): Take off immediately all contaminated clothing.
Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners.
Do not empty into water course.
Safety data sheet available for professional user on request.
In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water jet.
If medical advice is needed, have product container or label at hand.
Tips & Advice
-
1. Preparing the SurfacesSURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free
from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
CLEAN SURFACE: Use Dulux Fungicidal Wash to treat areas affected by mould, algae, lichen or moss. For wood surfaces, no primer or undercoat is required. For Galvanised iron to be primed with Dulux Galvprime to ensure good adhesion.
NOTE: Always keep doors and windows fully open during application and drying. -
2. CleaningClean all equipment with clean water immediately after used.
-
3. StoringKeep out of reach of children. Keep away from heat/sparks/open flame. - No smoking. Keep away from combustible material. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.