For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Sheen Finish
Coverage
Up to 12 m²/L
Drying Time
Single coat at standard thickness: Dependant on temperature and humidity. Recoat: 2-3 hours
Coats
2
Product Features
Ultimate Crack proof - cover 10X* wider cracks
Ultimate Weather Resistant
Ultimate Water Repellent
12 years warranty (T&C apply)
KeepCool™
Low VOC, low odour
Product Description
Dulux Weathershield Powerflexx is a top quality elastomeric exterior wall paint with highly advanced Triple Defence Technology that stretches more to cover 10X* wider cracks, providing water repellence and protection against extreme weather conditions.
Application Description
Roller or brush
Health & Safety
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Tips & Advice
1.
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux Primer. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 15%. These walls should be left to dry further.
2.
Cleaning
Clean all equipment with clean water immediately after use.
3.
Storing
Keep away from food, drinks and animal feed. Store in a cool and shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
