Dulux Stellar Satin

    Interior & Exterior Metal and Wood paints
    Hot Mustard 20YY 34/700
    Change Colour
    Size
    Paint Calculator
    This product is not for online sale and can only be purchased from selected stores.
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Satin
    • Coverage 10 - 12m2/L
    • Drying Time Touch Dry : 1 hour under normal conditions
      Recoat 2 : Min 4 hours under normal conditions

      Note :
      Drying time is dependent on many factors such as the environment,temperature, humidity, number and thickness of coats applied, thinner used and substrate condition.
    • Coats 2
    Product Features
    • Low Odour & Low VOC
    • Fast dry
    • Non yellowing

    Product Description

    Dulux Stellar Satin is a high quality, non-yellowing, water based paint with a satin finish.
    It provides excellent colour & gloss retention to uplift the look of metal & wood items.

    Suitable for use on interior and exterior metal and wood surfaces, both new or previously painted. It has excellent adhesion, colour retention, good durability and is low odour compared to conventional solvent based gloss finish.

    Application Description

    For painting of large surfaces such as door, roller should be used to achieve optimum flow and finishing.
    Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with water. Dilution above 20% will affect the performance of the paint.

    Health & Safety

    Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not eat, drink or smoke when using this product. Remove as much paints as possible from brushes and rollers before cleaning. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional user on request. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water jet. If medical advice is needed, have product container or label at hand.
    Download Adobe Reader

    Tips & Advice

    • 1. Preparing the Surfaces
      Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. All surfaces should be rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.
      Wood surfaces should be sanded in the direction of the grain, using suitable abrasive paper and then dusted off. Remove mould. Treat the affected area with Dulux Fungicidal Wash (A980-19260) and let wood dry at least 24 hours before application of Dulux Stellar Satin.
      Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot-primed.
      For optimum performance, new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion

      NOTE: Ensure good ventilation during application and drying.
    • 2. Cleaning
      Clean all equipment with clean water immediately after used.
    • 3. Storing
      Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

    Add a new job

    • Living room
    • Bedroom
    • Kitchen

    Add a new job

    • Living room
    • Bedroom
    • Kitchen

    Edit a job

    Delete job

    Delete job

    Are you sure? All notes, photos and saved items will be deleted.

    Save colour

    Hot Mustard 20YY 34/700

    Save to My Workspace

    Save product

    Dulux Stellar Satin

    Save job

    Sorry, we couldn't find any results
    Fetching the data, please wait...