Dulux Stellar Primer

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish NA
  • Coverage 11m²/L
  • Drying Time Single coat at standard thickness: 40-50 microns..
    Touch Dry: 2-3 hours under normal conditions.
    Recoat: 8-12 hours under normal conditions
  • Coats 1
Product Features
  • Provides good corrosion protection
  • Excellent opacity which allows a single coat coverage
  • Good adhesion properties
  • Rust prevention properties
  • Conforms to Singapore Green label criteria

Product Description

Dulux Aura Metal Primer is a solvent based, anti corrosion, protective primer.

Application Description

Brush or Roller-Thinning is usually not necessary after thorough stirring. If required, dilute up to 10% with white spirit. Dilution above 20% will affect the paint performance.
Conventional Spray-Dilute with 10%-20% of white spirit.
Airless Spray-Ready for use.

Health & Safety

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.
Download Adobe Reader
  • tds_dulux_stellar_primer.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.

    Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot- primed.

    For optimum performance new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use.
  • 3. Storing
    Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

Sorry, we couldn't find any results
Fetching the data, plz wait..