Dulux Inspire Interior Matt

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 10-11 m2/L.
  • Drying Time Single coat at standard thickness:
    Touch Dry: Dependant on temperature and humidity.
    Recoat: 2-3 hours.
  • Coats 2
Product Features
  • Attractive matt finish for interior walls
  • Washable / EasyWipe
  • Chromabrite Technology for longer, lasting colours
  • Anti-mould & Anti-fungus
  • Good coverage & good opacity
  • Low VOC, low odour

Product Description

Dulux Inspire Interior Matt contains advanced Chroma Brite Technology to give beautiful long lasting colours that makes your wall look fresh and with matt finish. It also provides good coverage to deliver a smooth finish. With Dulux Inspire Interior Matt, your home will always look fresh and welcoming

Application Description

Roller or brush

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/flatting should be used wherever possible. Work in well-ventilated areas. Use suitable personal protection equipment. • Wear eye/hand protection. • Do not breathe vapour/spray. • Use only in well-ventilated areas. • Remove as much paints as possible from brushes and rollers before cleaning. • Avoid release to the environment. • Collect spillage. • Keep away from food, drinks and animal feed. • Store in a cool and shaded place. • Container must be in a secure, upright position and be tightly closed. • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. • Do not empty into water course. • Safety Data Sheet available for professional/user on request. • Keep out of reach of children. • If medical advice is needed, have product container or label at hand.

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux Sealer/Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 16%. These walls should be left to dry further.
  • 2. Cleaning
    Clean all equipment with water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.
Fetching the data, please wait...