Dulux Inspire Exterior

Durable Exterior Paint
Roma Haze 10YY 54/034
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt Finish
  • Coverage 11m²/L
  • Drying Time Single coat at standard thickness:
    Dependant on temperature and humidity.
    2-3 hours
  • Coats 2
Product Features
  • Chromabrite Technology for longer, lasting colours
  • Fungus and algae resistance
  • Water resistance
  • Dirt resistance
  • Good alkali resistance and adhesion properties
  • Low Odour & Low VOC

Product Description

Dulux Inspire Exterior Finish is quality acrylic based emulsion paint with advanced Chroma Brite Technology that keeps your house looks fresh and new for a longer period of time. It has durable paint film that provides resistance from damage caused by water, algae and fungus, and peeling off. In compliance to SIRIM Eco Label and Singapore Green Label.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery
    residues by thorough brushing and scraping, using a stiff fiber brush and high
    pressure water jet. Treat any areas affected mould, lichens, algae and moss with
    Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade
    Filler. Surfaces that remain powdery, friable or chalky after thorough preparation
    should be sealed with one coat of an appropriate Primer (see below). It should not
    be applied on areas where moisture reading (as measured by Protimeter) exceeds
    17%. These wall should be left to dry further.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Keep away from the reach of children and away from food, drinks and animal feed.
Fetching the data, please wait...