Dulux Fungicidal Wash

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish NA
  • Coverage 10-20 m²/L
  • Drying Time Drying time : 2 - 4hours Leave on the surface for 24 hours then rinse with clean water to remove
    dead growth/residues.
  • Coats 1
Product Features
  • Low odour
  • Non-staining, and completely Biodegradable
  • Kills fungus and algae growth on both interior and exterior surfaces, without affecting the adhesion and colour of subsequent paint coats

Product Description

Dulux Fungicidal Wash is an aqueous chemical wash, which is low in odour, non-staining, and completely biodegradable.

Application Description

SURFACE PREPARATION: Remove any mould, algae, lichen, moss by scraping and brushing.
Dulux Fungicidal Wash will only be effective on surface growths. Where old growths have been trapped between coats during previous re-decoration, all existing coatings will need to be removed in order to treat the surface effectively.
SYSTEM INFORMATION : Mix thoroughly by shaking the container. Apply the solution by brush only to all affected areas. Leave for 24 hours and then thoroughly rinse and scrub
with clean water to remove residues and dead growth. Repeat the process if necessary. On badly affected areas or where lichen is present the use of high-pressure water hosing may be necessary to remove all organic growth completely. Do not use Hypochlorite Wash before or after Dulux Fungicidal Wash as it oxidizes the active ingredient and makes it ineffective. If Hypochlorite Wash
has been used, the surface must be thoroughly washed down with clean water before using Dulux Fungicidal Wash. Do not apply in wet weather.

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not breathe vapour/ spray. Do not eat, drink or smoke when using this product. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from heat/sparks/open flame.- No smoking. Store in a cool and shaded place. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    SURFACE PREPARATION: Remove any mould, algae, lichen, moss by scraping and brushing.
    Dulux Fungicidal Wash will only be effective on surface growths. Where old growths have been trapped between coats during previous re-decoration, all existing coatings will need to be removed in order to treat the surface effectively.
  • 2. Cleaning
    Clean all equipment with clean water immediately after used.
  • 3. Storing
    Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed
Fetching the data, please wait...