Dulux Ambiance AirFresh

Dulux Ambiance AirFresh

Clean Your Air - The All-in-1 Solution For Interior Wall
Aqua Memories 17BG 60/228
Change Colour
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage Up to 12 m²/L
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity. Recoat: 2-3 hours
  • Coats 2
Product Features
  • PureAir Technology
  • HD Colour Technology - locks in colours to keep walls looking beautiful for long
  • Anti-Bacteria
  • Anti-viral
  • Anti-mould & Anti-fungus
  • Ultimate Washability
  • Low Odour & Low VOC
  • Singapore Green Label
  • Low sheen finish
Dulux Ambiance™ AirFresh is an all-in-1 premium quality interior wall paint with low sheen finish. Formulated with PureAir Technology, it helps to reduce harmful air pollutants and improve indoor air quality. It also comes with anti-viral, anti-bacterial and anti-mould/fungus properties to protect your walls and promote a healthier home. In addition, it comes with HD Colour Technology that keeps walls looking fresh and beautiful for longer.
Roller or brush
Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes | Wet sanding/ flatting should be used wherever possible |
Work in well ventilated areas |Use suitable personal protection equipment | Wear eye/hand protection | Do not eat, drink or smoke when using this product |
Remove as much paints as possible from brushes and rollers before cleaning | In case of contact with eyes, rinse immediately with plenty of water and seek medical advice | IF ON SKIN (or hair)- Take off immediately all contaminated clothing | Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners | Do not empty into water course | Safety data sheet available for professional user on request |Read label before use | If medical advice is needed , have product container or label at hand|
Download Adobe Reader
  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux Sealer/Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 16%. These walls should be left to dry further
    NOTE: Ensure good ventilation during application and drying.
  • 2. After use
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Store in a cool and shaded place | Keep out of reach of children | Keep away from combustible material | Keep away from food, drinks and animal feed | Container must be in a secure, upright position and be tightly closed |

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

Add a new job

  • Living room
  • Bedroom
  • Kitchen

Add a new job

  • Living room
  • Bedroom
  • Kitchen

Edit a job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save colour

Aqua Memories 17BG 60/228

Save to My Workspace

Save product

Dulux Ambiance AirFresh

Save job

Sorry, we couldn't find any results
Fetching the data, please wait...