Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.

Dulux Aluminium Wood Primer Sealer
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 12 m2/L.
-
Drying Time Single coat at standard thickness. Depend on temperature and humidity
-
Coats 1
-
Good penetration and wetting properties
-
Contains aluminium pigment which helps prevent migration of wood sap to the surface
Product Description
Dulux Aluminium Wood Primer Sealer is a solvent based primer for wood.
Application Description
Ready for use, thinning is usually not necessary.
Health & Safety
Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking.
Avoid contact with skin.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To remove splashes of paint from skin, use soap and water or a recognized cleanser.
If swallowed seek medical advice immediately and show this container or label.
Keep away from food, drinks, animal feed and out of reach of children.
Keep away from combustible material.
Container must be stored in a cool and shaded place.
It must be tightly closed in a secure, upright position.
Work in a well-ventilated area and do not breathe in vapor or spray.
A suitable mask should be worn during sanding.
When applying paint, it is advisable to wear eye protection.
In case of firm use foam, dry powder, AFFF, CO2 – never use water.
In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment.
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Dulux Product Safety Data Sheet for further details.
- A519-3697 Dulux_Aluminium_Wood_Primer_Sealer.pdf
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. All surfaces should be thoroughly rubbed down in the direction of the grain, using a suitable abrasive paper and then dusted off. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These substrate should be left to
dry further. -
2. CleaningClean all equipment with Dulux Thinner 850-41 or white spirit immediately after use.
-
3. StoringKeep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.