If you love the textural quality brick brings to a room but feel the colour is not quite right, try giving your wall a makeover with a splash of colour. Here is how to create a flawless finish:
1) It is important to start with a clean canvas. Give your brickwork a good scrub with a scourer or stiff brush and use a vacuum to remove any loose bits of mortar or dust. Wipe down the face of the bricks with a damp, soapy cloth and allow your wall to dry for 12 hours.
2) Can you see any cracks in the bricks or cement joints? If so, use a filler and follow the drying instructions on the packaging.
3) Next, apply a primer and undercoat that is suitable for brick using a roller with a medium to long pile (the rougher the surface of the brick, the longer the pile you will need). Use a brush to apply the primer inside all of the joins that the roller cannot reach. Give the primer plenty of time to dry before you start painting – check the drying instructions if you are unsure.
4) Choose a water-based acrylic paint intended for interior use, and paint your brick wall as you would any interior wall, using the same roller you used to prime the surface. If the space you are painting connects with a different coloured wall or the ceiling, you will need to cut in around the edges and corners using a brush to create a professional looking finish.
5) Exposed brick is more porous than regular plaster walls, so you will need at least two coats to get a uniform finish. Allow each layer to dry fully before applying additional coats – we recommend no more than fours coats.