Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Water-Based Gloss

Heather Hills
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Gloss
  • Coverage 10m²/L
  • Drying Time Single coat at standard thickness: 30 to 40 microns Touch Dry: 1 hour under normal conditions. Recoat: 3 hours under normal conditions.
  • Coats 2
Product Features
  • Low VOC, low odour
  • 100% water-based specially designed for application on wood & metal surfaces
  • Quick drying & yellowing resistance

Product Description

Dulux Water-Based Gloss (for both wood and metal) is a high quality water-based Gloss.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
  • A908 LINE Dulux Water-Based Gloss WBG Topcoat- TDS 22 Apr 13.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. If after thorough preparation, surfaces remain powdery, or suffer front alkali attack seal with one coat of an appropriate Primer. Note: Even though this primer facilitates painting on damp walls, it should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 22%. These walls should be left to dry further. However, if painted, the moisture will build up behind this waterproof primer and cause blisters to emerge on the paint film on aging.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.