Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Water-Based Gloss Primer

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 9m²/L
  • Drying Time Single coat at standard thickness: 30 to 40 microns 30 minutes under normal conditions 2 hours under normal conditions
  • Coats 1
Product Features
  • High Quality Primer
  • 100% water-based
  • suitable for use on wood and metal surfaces

Product Description

Dulux Water-Based Gloss Primer is a high quality water-based gloss primer.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
  • A931-15480 Dulux Water-Based Gloss Primer WBG Primer- TDS 22 Apr 13.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Steel surfaces should be manually prepared by power or hand tool to BS7079 Part A1:1989 ST3.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.