Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Solarscreen Exterior Transparent Wood Finish

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Exterior Transparent Wood Finish
  • Coverage 19m²/L
  • Drying Time Single coat at standard thickness: Touch Dry : 1 - 2 hours. Recoat: 4 hours.
  • Coats 2
Product Features
  • Excellent abrasion resistance
  • Highlight natural beauty of wood through its quality transparent finish
  • Water-resistant, flexible & long lasting protection
  • Filter out UV rays to minimize problems of cracking, flaking & peeling

Product Description

Dulux Solarscreen Exterior Transparent Wood Finish is a durable pigmented varnish based on a special resin for protection and decoration purposes.

Application Description

Roller or brush

Health & Safety

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.
  • A339-LINE DULUX SOLARSCREEN Exterior Transparent Wood Finish.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. All surfaces should be thoroughly rubbed down in the direction of the grain, using a suitable abrasive paper and then dusted off. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These substrate should be left to dry further.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner 850-41or white spirit immediately after use.
  • 3. Storing
    Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.