No Colour Selected

Dulux Inspire Exterior

Select a Colour
Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt Finish
  • Coverage 11m²/L
  • Drying Time Single coat at standard thickness:
    Dependant on temperature and humidity.
    2-3 hours
  • Coats 2
Product Features
  • Durable Exterior Paint

Product Description

Dulux Inspire Exterior Finish is quality acrylic based emulsion paint with advanced Chroma Brite Technology that keeps your house looks fresh and new for a longer period of time. It has durable paint film that provides resistance from damage caused by water, algae and fungus, and peeling off. In compliance to SIRIM Eco Label and Singapore Green Label.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery
    residues by thorough brushing and scraping, using a stiff fiber brush and high
    pressure water jet. Treat any areas affected mould, lichens, algae and moss with
    Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade
    Filler. Surfaces that remain powdery, friable or chalky after thorough preparation
    should be sealed with one coat of an appropriate Primer (see below). It should not
    be applied on areas where moisture reading (as measured by Protimeter) exceeds
    17%. These wall should be left to dry further.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Keep away from the reach of children and away from food, drinks and animal feed.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

Sorry, we couldn't find any results
Fetching the data, please wait...