No Colour Selected

Dulux EasyClean™

Select a Colour
Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt Finish
  • Coverage 11-12m²/L
  • Drying Time Single coat at standard thickness:
    Touch Dry: Dependant on temperature and humidity.
    Recoat: 1-2 hours.
  • Coats 2
Product Features
  • Sophisticated matt emulsion for interior walls & ceilings
  • Good Washability
  • Anti-Bacteria
  • Highly durable, smooth matt finish
  • Colourguard™ Technology
  • Water Based

Product Description

Dulux EasyClean is a premium interior quality matt finish paint that provides good stain resistance which allows you to clean common household stains off your wall easily. Now with Anti-bacterial functionality, it aids to inhibit the growth of bacteria on the walls. Formulated with Dulux Colourguard Technology, it locks in colours to keep your wall looking beautiful for longer.

Application Description

Roller or brush

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
Download Adobe Reader
  • ds_my_en_dulux_easyclean_my_eng.pdf
  • TDS_easyclean_antibacterial_promise.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly
    adhering material, dirt, grease or wax and be thoroughly rubbed down using
    a suitable abrasive paper and dusted off. Treat areas affected by mould,
    fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough
    preparation, surfaces remain powdery, seal with one coat of an appropriate
    Primer (see TDS). It should not be applied on areas where moisture
    reading (as measured by Protimeter) exceeds 16%. These wall should be
    left to dry further.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

Sorry, we couldn't find any results
Fetching the data, plz wait..