Dulux Aura Satin Matt

    Evolving Rocks 21YY 45/060
    Change Colour
    Size
    Paint Calculator
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Satin
    • Coverage 12m²/L
    • Drying Time Single coat at standard thickness: 30 to 40 microns.
      Touch Dry:1 hour under normal conditions.
      Recoat:3 hours under normal conditions.
    • Coats 2
    Product Features
    • Fast dry. Back in service rapidly and less disruption.
    • Low odour
    • Low VOC
    • Non yellowing
    • Good application properties
    • Easier clean-up of painting tools

    Product Description

    Dulux Aura Satin Matt is a premium high quality water based paint with a Satin finished.

    Application Description

    Brush or Roller-For painting of large surfaces like door, roller should be used to achieve optimum flow and finishing
    Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with water. Dilution above 20% will affect the performance of the paint.
    Conventional Spray-Dilute the paint with 10%-20% of water.
    Airless Spray-Ready for use.

    Health & Safety

    Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
    Download Adobe Reader
    • R1120009_Line_Aura_Satin_Matt_TDS_17Apr_2020.pdf
    • ds_my_en_ds_aura_satin_matt_my.pdf

    Tips & Advice

    • 1. Preparing the Surfaces
      Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.

      Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot- primed.

      For optimum performance new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.
    • 2. Cleaning
      Clean all equipment with clean water immediately after used.
    • 3. Storing
      Keep away from food, drinks and animal feed. Store in a cool and shaded place.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.