Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Aura Gloss

PASTEL SAGE
Size
Paint Calculator
This product is currently unavailable online. Please visit your nearest store.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Gloss
  • Coverage 12m²/L
  • Drying Time Single coat at standard thickness: 30 to 40 microns. Touch Dry:1 hour under normal conditions. Recoat:3 hours under normal conditions.
  • Coats 2
Product Features
  • Low VOC, low odour
  • Fast dry
  • Non yellowing
  • Good application properties
  • Easier clean-up of painting tools
  • Conforms to Singapore Green label criteria
  • Water Based

Product Description

Dulux Aura Gloss is a high quality non-yellowing high gloss finish suitable for use on interior and exterior metal and wood surfaces, both new and previously painted. It has excellent adhesion, colour retention, good durability and is low odour compared to conventional solvent based gloss finish.

Application Description

Brush or Roller-For painting of large surfaces like door, roller should be used to achieve optimum flow and finishing Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with water. Dilution above 20% will affect the performance of the paint. Conventional Spray-Dilute the paint with 10%-20% of water. Airless Spray-Ready for use

Health & Safety

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.
  • A908 line Aura Gloss TDS 17Apr2020..pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion. Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot- primed. For optimum performance new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.
  • 2. Cleaning
    Clean all equipment with clean water immediately after used.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.